Controls Group Hydraulic shrinkage mould with measurement apparatus Hydraulic shrinkage mould with measurement apparatus

Hydraulic shrinkage mould with measurement apparatus

General description
General description
Shrinkage mould
The UNI 11307 method is suitable for the determination of hydraulic axial shrinkage on concrete beams during hardening.
According to this method, steel pins shall be glued on the head surfaces of the specimen in order to measure the dimensional changes of specimens properly stored in temperature and specified humidity conditions. The test is performed with the 55-C0100/MB11 beam mould and the shrinkage measurement by the 55-C0115/3D apparatus.

Beam mould
Made of precisely machined cold finished steel , 100x100x500 mm
Weight approx.: 19 kg

Steel pins
To be glued on the beam ends surfaces

Shrinkage measurement apparatus
Metal stand, fitted with reference bar and digital gauge 25.4 x 0.001 mm, with output for PC. Cable not included. See accessories.
Weight approx. 14 kg
More +

Ordering info

Beam mould 100x100x500 mm

Steel pins for concrete shrinkage determination to UNI 11307. Pack of 10 pieces.                    

Shrinkage measuring apparatus with reference bar and 25.4x 0.001 mm digital gauge with output for PC connection (special cable required, see accessories)


Serial cable for PC connection


Contact Us

Controls Group USA, Inc.

2521 Technology Drive, Suite 203
Elgin, Il 60124.
Phone: +1 844 291 4305

Having read the information on the data processing:

È necessario effettuare una scelta per proseguire

We will never divulge your data to third parties.

By clicking send button, I confirm that I request the service indicated in point a) of these guidelines; my consent to the processing of data for the purposes of the service, including the processing methods mentioned in these guidelines, including possible processing carried out in EU member states or non-EU countries.