Controls Group Slotted distance pieces Slotted distance pieces

Slotted distance pieces

General description
General description
Made of steel. Used to reduce the vertical daylight of the compression machine model 50-A39xxx depending on the size of the specimen and considering that, in general, the maximum piston travel is 50 mm. 
Slotted distance pieces are inserted between the upper crossbar and the spherical seat. To lower the spherical seat you have to use the axial screw assembly.
The following table is a suitable application guide to help you in the selection of required distance pieces.
More +

Technical specifications

Distance pieces required for specimen size:
* The distance pieces here below listed refer to grinded cylinders
Machine and frames
Series 50-


3”x6” and
Ø  75x150mm*

Q.ty       Code
4”x8” and
Ø  100x200mm*
Q.ty       Code
Ø 150x300 and 160x320mm*
 Q.ty      Code
Blocks  up to (WxDxH) 
8"X16"8"  (200x400x200mm) 

Q.ty      Code
Blocks  up to (WxDxH) 
8"X16"4"  (200x400x100mm)

Q.ty      Code
A39x6x 10,7" (271 mm) -  -   -  1          L1000/68B   1           L1000/100B
1           L1000/68B
A39x6x + A39C62/CYL 14.6" (370 mm) 2           L1000/100B 1             L1000/100B
1             L1000/50B
1             L1000/50B - -

Ordering info

Distance pieces for concrete compression machine, only for model 50-A39xxx

Slotted distance piece dia. 7.7"x1.6" height (dia. 195x450 mm height). Weight approx. 17.2 lbs (7.8 kg)
Slotted distance piece dia. 7.7"x2" height (dia. 195x50 mm height). Weight approx. 21.6 lbs (9.8 kg)                       
Slotted distance piece dia. 7.7"x2.7" height (dia. 195x68 mm height). Weight approx. 29.8 lbs (13.5 kg)
Slotted distance piece dia. 7.7"x4" height (dia. 195x100 mm height). Weight approx. 44.1 lbs (20 kg)                              


Contact Us

Controls Group USA, Inc.

2521 Technology Drive, Suite 203
Elgin, Il 60124.
Phone: +1 844 291 4305

Having read the information on the data processing:

È necessario effettuare una scelta per proseguire

We will never divulge your data to third parties.

By clicking send button, I confirm that I request the service indicated in point a) of these guidelines; my consent to the processing of data for the purposes of the service, including the processing methods mentioned in these guidelines, including possible processing carried out in EU member states or non-EU countries.