Controls Group http://www.controls-group.com/images/logo_controls.gif Rock classification hammer Rock classification hammer
close

Rock classification hammer

Images
General description
General description
Used to measure the rebound index on rock cores and samples. The device is simple, easy to use, and is similar to the one used for testing concrete. The level of impact energy only is different: 0.735 Nm. Rock cores are positioned horizontally and the rebound index is obtained from the average of several measurements performed perpendicularly to the longitudinal axis, using the ASTM rock cradle 45-D0562/A (see accessories) as shown in the picture.
Supplied complete with case.
  • Weight approx.: 1.5 kg
More +

Ordering info

45-D0561/C
Rock test classification hammer with low impact energy 0.735 Nm. Supplied with hard plastic carrying case.                               Conforming to ASTM D5873 and ISRM.             

45-D0561/C1
Rock test classification hammer with low impact energy 0.735 Nm. Supplied complete with traceable calibration certificate and hard plastic carrying case.                                             
Conforming to ASTM D5873 and ISRM.    

Accessories

ASTM rock cradle

45-D0562/A 
ASTM rock cradle
Universal model, can hold rock core samples from EX (21.46 mm) to NX size (54.74 mm dia.). The cradle comprises a vertical hammer guide fit to a steel plate of minimum mass conforming to ASTM D5873, and a magnetic “V” block that can be easily fit to the steel plate.
  • Dimensions: 220 mm dia. x 420 mm high approx.
  • Weight approx.: 27 kg
 
Calibration anvil

Standards: EN 12504-2, ASTM C805, ASTM D5873

58-C0184 
Calibration anvil
Used for calibration of concrete test hammer for concrete (model 58-C0181/C and 58-C0181/DGT) and rock classification hammer (model 45-D0561/C). Made from special alloy steel and supplied complete with traceable hardness certificate. It is essential for the periodical laboratory verification of the rock classification hammer.
  • Dimensions: 150 mm dia. x 230 mm height
  • Weight approx.: 16 kg  

45-D0561/C2
Spare abrasion stone for testing hammer    



Documents

Contact Us

Controls Group USA, Inc.

2521 Technology Drive, Suite 203
Elgin, Il 60124.
Phone: +1 844 291 4305
Email: info@controls-usa.com
www.controls-usa.com

Having read the information on the data processing:

È necessario effettuare una scelta per proseguire

We will never divulge your data to third parties.

By clicking send button, I confirm that I request the service indicated in point a) of these guidelines; my consent to the processing of data for the purposes of the service, including the processing methods mentioned in these guidelines, including possible processing carried out in EU member states or non-EU countries.