Controls Group http://www.controls-group.com/images/logo_controls.gif 300 mm dia. Platen test set, Swiss method 300 mm dia. Platen test set, Swiss method
close
Soil

300 mm dia. Platen test set, Swiss method

SNV 70312
Images
General description
General description
Used to estimate the bearing capacity of a soil under field loading conditions on flexible pavement components .
The relatively lightweight (68 kg in total) and small dimensions of the apparatus make it very easy to use and to move from one place to another. The measuring bridge made from aluminium alloy, is very light and has telescopic extensions so It can be positioned in a few minutes with minimum effort. The remote load control and gauge are mounted on the pump and it is not necessary to go near the platen for recording the load.  The deformations are measured with three dial indicators.
This system is very similar to the \#300-to-760-mm-dia-platen-test-set\# and
\#300-mm-dia-platen-test-set\#.
More +

Technical specifications

  • Loading ram cap.: 100 kN
  • Gauge range: 0 to 0.8 MN/m2
  • Dial indicators: No. 3, 30 mm travel 0.01 mm divisions
  • Carrying case dimensions:
    1) 1080x360x200 mm
    2) 920x360x200 mm
  • Total weight approx.: 68 kg

* Plate bearing test apparatus 200 kN cap also available.

Ordering info

35-T11S1  
Plate bearing test apparatus 100 kN cap., Complete analogue configuration. Includes: Kydraulic Kit with trolley, three dial indicators, 300 and 160 mm bearing plates, Anti tilting jig and beam with his wooden carrying case.

35-T11S2  
Plate bearing test apparatus 200 kN cap., Complete analogue configuration. Includes: Kydraulic Kit with trolley, three dial indicators, 300 and 160 mm bearing plates, Anti tilting jig and beam with his wooden carrying case.

Upgrading

Spares

35-T11S1/B

Beam mode "Y" for swiss method

35-T11S1/ARM
Adjustable support for displacement gauge to be fitted on the Swiss datum bar of the plate bearing test equipment     

35-T11S1/BC
Wooden carrying case for bar code 35-T11S1/B.  

35-T1100/100A
Hydraulic Kit composed by: double-stage manual pump, cylinder and hose, with extension rods, two spherical seats (the upper one with magnetic connection). Analogue manometer 200 mm dia., triple scale. Supplied complete with calibration certificate.

Documents

Contact Us

Controls Group USA, Inc.

2521 Technology Drive, Suite 203
Elgin, Il 60124.
Phone: +1 844 291 4305
Email: info@controls-usa.com
www.controls-usa.com

Having read the information on the data processing:

È necessario effettuare una scelta per proseguire

We will never divulge your data to third parties.

By clicking send button, I confirm that I request the service indicated in point a) of these guidelines; my consent to the processing of data for the purposes of the service, including the processing methods mentioned in these guidelines, including possible processing carried out in EU member states or non-EU countries.